Accessories

Kayak Fishing Paddles: Length for Wide, High Seats

For a 32-inch-wide fishing kayak and a paddler 5 feet 8 inches tall, start with Bending Branches’ 98-inch (250-centimeter) fishing-chart length. If you will paddle only with the seat high, its guide points to 102 inches (260 centimeters). The right starting point depends on the maker’s chart, your height, your boat’s width and your seat position; these are maker-specific recommendations, not one length for every fishing kayak.1

Key Takeaways

  • Measure your boat at its widest point, then use the selected maker’s fishing chart and its height and seat labels.1,2
  • Add 4 inches (10 centimeters) for mostly high-seat use when following Bending Branches’ fishing guidance.1
  • Keep stroke style and seat position attached to Werner’s chart rows. Watch a forward stroke: Werner describes a high-angle stroke as holding the shaft in a more vertical position, and a low-angle stroke as a lower hand position with a horizontal shaft angle.3
  • Choose an adjustable model if you need to change length for different seats, standing or different kayaks, and stay within its listed range.4,5
  • Check the fit in your boat: Bending Branches says a paddle that is too short can cause knuckle contact or leaning, while one that is too long adds weight you have to swing and can reduce control.2

Start with the chart for your boat and seat

Beam means the boat’s width. Measure the hull—the boat’s body—across its widest point. Bending Branches’ fishing chart uses that width and your height; its height columns are 6 feet and shorter, and 6 feet 1 inch and taller.1 Its chart gives these starting lengths:1,2

Maker and chart condition6 feet and shorter6 feet 1 inch and taller
Bending Branches, under 28 inches wide91 inches (230 cm)94 inches (240 cm) 1
Bending Branches, 28–31.75 inches wide94 inches (240 cm)98 inches (250 cm) 1
Bending Branches, 32–35.75 inches wide98 inches (250 cm)102 inches (260 cm) 1
Bending Branches, 36–39.75 inches wide102 inches (260 cm)106 inches (270 cm) 1
Bending Branches, 40 inches and wider106 inches (270 cm)110 inches (280 cm) 1
Werner Shuna, high-angle “Kayak,” 28 inches and wider87 inches (220 cm)91 inches (230 cm) 5
Werner Shuna, high-angle “Sit on Top,” 28–34 inches wide87 inches (220 cm)91 inches (230 cm) 5
Werner Shuna, high-angle “Sit on Top,” 34 inches and wider91 inches (230 cm)94 inches (240 cm) 5
Werner Shuna, high-angle raised-seat “Sit on Top,” 30–34 inches wide94 inches (240 cm)98 inches (250 cm) 5
Werner Shuna, high-angle raised-seat “Sit on Top,” 34 inches and wider98 inches (250 cm)102 inches (260 cm) 5
Werner Camano, low-angle “Kayak,” 28 inches and wider91 inches (230 cm)94 inches (240 cm) 6
Werner Camano, low-angle “Sit on Top,” 28–34 inches wide91 inches (230 cm)94 inches (240 cm) 6
Werner Camano, low-angle “Sit on Top,” 34 inches and wider94 inches (240 cm)98 inches (250 cm) 6
Werner Camano, low-angle raised-seat “Sit on Top,” 30–34 inches wide98 inches (250 cm)102 inches (260 cm) 6
Werner Camano, low-angle raised-seat “Sit on Top,” 34 inches and wider102 inches (260 cm)102 inches (260 cm) 6

A high-angle stroke is more vertical; a low-angle stroke is more horizontal. Werner describes its high-angle blades as shorter and wider with slight dihedral, and its low-angle blades as longer and narrower with substantially more dihedral, or shaping on the working face, to keep them stable farther from the boat.3 Werner publishes separate fishing charts for those styles. For the same height and width, its low-angle “Kayak” row is 4 inches (10 centimeters) longer than its high-angle row. But the Camano low-angle chart’s raised-seat row for boats 34 inches and wider gives the same length in both height columns.6 Use the row that matches your stroke, boat type and seat; do not add 4 inches to every Werner recommendation.5,6

The 34-inch boundary appears in Werner’s rows on both sides. If your boat measures exactly 34 inches, check the model’s chart or ask Werner which row to use. Bending Branches also prints width bands with small gaps between some endpoints, such as between 31.75 and 32 inches, so check with the maker if your measurement falls between its listed bands.5,6,1

Apply seat and stroke adjustments

For Bending Branches, add 4 inches (10 centimeters) for mostly high-seat use.1 If the seat moves between positions, consider an adjustable paddle spanning the chart’s 98–102-inch (250–260-centimeter) example range. Its guidance does not say whether the high-seat addition stacks with the separate multi-factor adjustment, so do not add a second 10 centimeters based on an undefined width or seat threshold.1

Bending Branches also suggests moving 4 inches (10 centimeters) longer if at least two listed factors apply: a relaxed pace, a true low-angle stroke, an unusually wide boat, outward-sloping hull sides, high seating, or height above the chart. It suggests moving 4 inches (10 centimeters) shorter if at least two other factors apply: an active pace, a true high-angle stroke, an unusually narrow boat, inward-sloping hull sides, a lower-than-usual seat, or height below the chart.1 Treat the seat condition as one factor; do not count it twice when applying the separate high-seat guidance.

Werner handles raised seats differently. Its raised-seat rows are intended as a compromise for boats with high and low seat positions. Use that row as printed rather than adding Bending Branches’ high-seat adjustment to it.5

Compare the choice with the paddle model

The chart gives a starting length. Next, check whether a model can provide that length and whether you need to change it while paddling.

  • Bending Branches Angler Classic Snap-Button: Fixed lengths are 94, 98, 102, 106 and 110 inches (240, 250, 260, 270 and 280 cm). The snap-button changes blade angle, not length. Its built-in system retrieves snagged lures, and the shaft marks help check a catch. The maker says the printed tape is not an official measuring tool for competitive angling or to determine the legality of a catch. 7
  • Bending Branches Angler Classic Versa-Lok: Adjustable ranges are 94–100, 98–104 and 102–108 inches (240–255, 250–265 and 260–275 cm). The maker says the system adds 6 inches (15 cm) for wider boats and elevated seats. It includes a snagged-lure retrieval system and shaft tape measure; printed accuracy can vary, and the maker says the tape is not an official measuring tool for competitive angling or to determine the legality of a catch. 4
  • Werner Shuna Hooked Adjustable, straight shaft: The three listed ranges are 87–94, 94–102 and 102–110 inches (220–240, 240–260 and 260–280 cm). Werner says adjustment can suit high and low seats, standing while looking for fish (“sight fishing”), or switching between kayaks of different widths. 5 Werner says its Hooked fishing paddles have a smooth shaft with no external parts to snag fishing line or tackle.3
  • Pelican Catch Fishing Kayak Paddle: Fixed at 102 inches (260 cm), and Pelican says it is sized for fishing kayaks over 34 inches wide. It has low-angle blades, a blade hook for retrieving lures and measuring tape along the shaft. 8

A ferrule is the joint that connects paddle shaft sections. Vibe’s Makana 100 assembly guide says to push the two paddle halves together until the spring-loaded button clicks into the locking hole.9 If you want one paddle for more than one seat position, an adjustable length lets you select within the model’s range. For the Bending Branches example above, its 250–265-centimeter Versa-Lok option includes both chart choices. If you use one seat position and your chart choice matches a fixed option, the Snap-Button offers that length without length adjustment.1,7,4

Werner’s Shuna and Camano are named options whose maker pages include standing while sight fishing as a reason to adjust. Set it within the range of your chosen model; the chart does not give a separate standing length. For an unsupported size, Werner invites customers to ask about custom lengths.5

Check fit before settling on a length

Bending Branches says a paddle that is too short can make you hit your knuckles on the boat’s edge or lean with each stroke. A paddle that is too long adds weight to swing and may reduce control.2 If you notice either fit problem, sit in your intended seat position and use your usual stroke. Try the chart length and another candidate within that model’s range. Compare hull clearance, whether you need to lean, and how well you control the kayak. If fit is still unclear, ask the maker about the model and length for your setup.

For another example of maker charts and how they compare, see paddle length charts compared. For shaft, blade and ferrule choices beyond fishing models, see how to choose a kayak paddle.

Footnotes

  1. Bending Branches, Kayak Fishing Paddle Sizing Guide ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11 ↩12 ↩13 ↩14 ↩15

  2. Bending Branches, How to Size Your Kayak Paddle ↩ ↩2 ↩3 ↩4

  3. Werner, Fishing Design & Fit ↩ ↩2 ↩3

  4. Bending Branches, Angler Classic Versa-Lok ↩ ↩2 ↩3

  5. Werner, Shuna: Hooked Adjustable Straight Shaft ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11

  6. Werner, Camano: Hooked Adjustable Straight Shaft ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8

  7. Bending Branches, Angler Classic Snap-Button ↩ ↩2

  8. Pelican, Catch Fishing Kayak Paddle ↩

  9. https://support.vibekayaks.com/portal/en/kb/articles/vibe-makana-100-assembly-paddle-and-rudder-setup ↩