Accessories

Waterproof Phone Cases for Paddling: What to Look For and How to Choose

Use these rules to narrow your choice:

  • If you keep a bulky protective cover on your phone, start with a larger pouch. Aquapac identifies its Floating Phone Case – Plus Plus for large phones and phones in heavy bumper cases.1
  • If you want added impact protection, compare padded cases. Aquapac’s Impact Max Floating Phone Case adds approximately 0.20 inch (5 millimeters) of foam on all sides.1
  • If you want a mounted phone, choose the attachment system alongside the case. Aquapac’s Extreme Phone Case – Klickfast uses the Klickfast Dock System for attachment to a boat, belt or harness.1
  • If underwater photography matters, choose around usable controls. OverBoard’s phone-case manual directs you to use side volume buttons underwater because the touchscreen will not work there.3
  • If the phone will be part of your communication arrangements, choose its carrying position before buying. The American Canoe Association (ACA) advises keeping communication devices working and readily available.4

Choose the kind of case around how you will carry it

A floating pouch is the starting point for comparison. Aquapac’s chooser prioritizes floating cases for water sports and describes its Floating Phone Case – Plus as a size intended for paddling, kayaking and swimming.1 Compare the fit before choosing between its compact, standard and larger options.

Padding is a separate feature. Aquapac describes Impact Max as providing both flotation and impact absorption; its size guide gives that model a phone-weight condition for flotation.1,5 Choose it when you want padding, then check its fit and flotation conditions independently.

For mounting, Aquapac lists the Extreme Phone Case – Klickfast in Plus and Plus Plus sizes, with options to dock it to a boat rail or chest harness.1 Identify the matching dock and intended mounting location before ordering.

A pocket-sized case is another option. Nite Ize’s RunOff Waterproof Phone Case has built-in attachment points, an adjustable lanyard and an interior holder for cards and cash.6 Its construction uses TPU with RF-welded seams and a TRU Zip waterproof zipper.6

Choose a submersible model for an immersion requirement. Aquapac specifically describes its TrailProof Phone Case as suitable for rain and splashes but not submersible.1

Check fit with your everyday cover included

Measure the complete phone setup you intend to carry. Aquapac’s size guide explicitly tells you to measure with the protective cover on and to size up for a bumper-style cover.5

Pay attention to what each measurement means. Aquapac’s finder uses phone height and combined width plus depth; its matching logic also leaves approximately 0.20 inch (5 millimeters) below the listed maximum height.1 OverBoard’s fit comparison instead provides maximum internal height and width.7 Keep those methods separate when comparing products.

The following dimensions are internal capacity figures from the named makers, rounded to hundredths of an inch:

CaseInternal heightInternal widthInternal depth
OverBoard Small5.91 inches (150 millimeters)2.95 inches (75 millimeters)7
OverBoard Large6.69 inches (170 millimeters)3.54 inches (90 millimeters)7
Nite Ize RunOff Waterproof Phone Case6.65 inches (169 millimeters)3.85 inches (98 millimeters)0.70 inch (18 millimeters)6

OverBoard’s fit chart identifies the iPhone 16 as an ideal fit for Small and the iPhone 16 Pro Max as an ideal fit for Large.7 Treat those model examples as a starting point, then account for your own cover.

For a borderline fit, ask the maker to confirm compatibility with your measured phone and cover. Include the exact case model in that request.

Separate waterproof limits from flotation

Read the case’s depth and duration together. Aquapac’s Instructions & Safety Notices limit applicable Aquaclip cases to 33 feet (10 meters) for up to 30 minutes, within an operating range of −13 to 104 degrees Fahrenheit (−25 to 40 degrees Celsius).2

OverBoard’s product FAQ gives its waterproof phone and tablet cases a depth rating of 19 feet (6 meters).8 Nite Ize rates the RunOff Waterproof Phone Case to IP67, specifying submersion to approximately 3.3 feet (1 meter) for up to 30 minutes.6 Choose against the stated conditions for the exact model.

Flotation means staying at the surface. Waterproofing means resisting water entry under stated conditions. Check both.

Aquapac’s general instructions say most devices weighing up to approximately 7.1 ounces (200 grams) will float with a supplied float pad.2 Its model-specific size guide says Impact Max floats phones weighing under approximately 8.1 ounces (230 grams), with heavier phones paired with the FD-1 flotation device.5

Check the loaded weight, including the everyday cover and anything else you intend to carry. Aquapac’s instructions still require a shallow-water flotation test of the sealed, loaded case and warn that the case is not a lifesaving device.2 Do not make flotation the deciding feature until you have completed that check.

Check unlocking, calls, touch and photographs

Before committing to a case, try the functions you intend to use while keeping it sealed: unlocking, opening an app, making a call and taking photographs with each camera.

Aquapac advertises through-case calling, scrolling, texting, navigation and photography through its clear windows.9 Its size guide warns that fingerprint or face recognition may fail through a waterproof case and recommends using your passcode.5

OverBoard’s phone-case manual likewise says fingerprint recognition will not function through its case, while passcode unlocking remains available.3 Set up and try that alternative before your outing.

For underwater pictures, OverBoard recommends physical side buttons rather than the touchscreen.8 Hiearcool’s instructions also direct users to volume buttons when underwater pressure interferes with touch operation, and identify the power button or “Raise to Wake” as waking options.10

If an essential function fails, change the setup or choose another case before relying on it. Ask the maker about compatibility with your exact phone.

Keep access in mind while trying the controls. The ACA calls for communication devices to remain readily available and in working order.4 Try reaching and operating the sealed phone from the carrying position you intend to use.

Follow the closure and testing instructions for your case

Use the instructions supplied for your exact closure. Aquapac’s manual distinguishes opening directions between Aquaclip sizes, while OverBoard uses sliding switches and Nite Ize uses a zipper.2,3,6

Aquapac Aquaclip

Aquapac’s Instructions & Safety Notices give these checks and closing steps:2

  1. Inspect the case, seams and closure before every use; Aquapac says not to use a damaged case.2
  2. Test the empty case in water before first use and after impact or prolonged storage.2
  3. Insert the device without letting sharp objects touch the case.2
  4. Check that all parts are attached, remove grit or sand, keep the material flat and properly seated in the clamp, and turn every lever fully closed; Aquapac says the levers should lock smoothly.2

Aquapac instructs you never to open the case in or under water; before opening, shake off water, towel it dry and hold the opening downward.2

OverBoard sliding closure

OverBoard’s Waterproof Phone Case – User Guide says to slide the switches apart until they click into the locked position, with the slide rail clear of debris, sand and dirt.3

For its initial bubble test, OverBoard directs you to use a bath or sink with something inside that can safely get wet.3 The manual distinguishes normal air escaping from the clip from a stream of bubbles coming from the pouch when lightly squeezed.3 OverBoard also requires inspection before each use and a repeat test whenever you are in doubt.3

Nite Ize TRU Zip

Nite Ize instructs you to move the slider slowly and pull firmly into the zipper’s end-stop, because incomplete closure prevents the intended seal.6 Its instructions call for periodic waterproofness testing by submerging the sealed case, and say not to use it if bubbles escape.6

Match care and storage to the maker

Aquapac’s instructions call for washing in soapy water and rinsing with fresh water after regular exposure to salt water, chlorine or sunscreen; they prohibit bleach, alcohol and proprietary cleaners.2 Aquapac also requires rinsing and drying after salt or chlorinated water before opening the case.2

OverBoard’s phone-case manual gives similar soapy-water washing and rinsing instructions, without bleach, alcohol or cleaning agents.3 It also directs you to shake excess water from the clip before opening.3

For Nite Ize’s zipper, the maker calls for routine lubrication with TRU Zip lubricants; for the bag itself, it calls for inspection for wear before use and protection from sharp objects and abrasion.6

For drying and storage, Hiearcool’s instructions call for air drying and keeping its pouch out of the sun.10 Aquapac warns that its case does not protect the contents from heat or sunlight, while OverBoard’s phone-case manual warns against prolonged sun exposure for the electronics inside.2,3

Follow the chosen maker’s condition checks before putting a stored case back into service. Ask about repair or replacement if its condition is uncertain.

Have the required equipment and communication arrangements aboard

The U.S. Coast Guard (USCG) requires one approved wearable personal flotation device—a life jacket—for every person aboard, in suitable condition and appropriate for the wearer and activity.11 Its guide requires wearable life jackets to be readily accessible and recommends wearing them underway.11

For communication, the ACA recommends a reliable option such as a waterproofed cell phone or VHF radio, plus a whistle attached to your life jacket and a waterproof flashlight.4 The ACA also advises reviewing hand and paddle signals before launching and staying within sight or earshot of your group.4

State equipment requirements need their own check. For example, the Oregon State Marine Board requires a whistle or compressed-air horn on boats under 39 feet 4 inches (12 meters), alongside the applicable life-jacket requirements.12 Oregon also requires navigation lights when underway or at anchor between sunset and sunrise and during restricted visibility, and specifies a white light shown toward approaching traffic.12

The USCG guide requires nighttime visual distress signals for manually propelled boats operating from sunset to sunrise on waters covered by its distress-signal rules, including coastal waters and the Great Lakes.11 Check the rules for your launch and intended route.

For trip arrangements, the Oregon State Marine Board advises leaving a float plan with family or friends so they know your expected return and can call for help if you are overdue.12

Make the final purchase decision with that equipment beside you. Choose the case that fits your covered phone, provides the stated protection you need, passes its maker’s checks and lets you use the functions you need from your intended carrying position.

Footnotes

  1. https://aquapac.net/pages/find-your-case ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9

  2. https://aquapac.net/pages/instructions-safety-ipx8-aquaclip-cases ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11 ↩12 ↩13 ↩14

  3. https://cdn.shopify.com/s/files/1/0054/3630/9622/files/Waterproof-Phone-Case-Care-Guide.pdf?v=1782907098 ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10

  4. https://americancanoe.org/wp-content/uploads/documents/sei-educational_resources/communication_final.pdf ↩ ↩2 ↩3 ↩4

  5. https://aquapac.net/pages/size-guide-list ↩ ↩2 ↩3 ↩4

  6. https://niteize.com/runoff-waterproof-phone-case ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8

  7. https://cdn.shopify.com/s/files/1/0054/3630/9622/files/phone-cases-fit-comparison-2025.pdf?v=1756824412 ↩ ↩2 ↩3 ↩4

  8. https://www.over-board.com/pages/help ↩ ↩2

  9. https://aquapac.net/ ↩

  10. https://www.hiearcool.com/uploads/ueditor/file/20240320/1710903836128834.pdf ↩ ↩2

  11. https://www.uscgboating.org/assets/1/AssetManager/Boaters-Guide-to-Federal-Requirements-for-Receational-Boats-20231108.pdf ↩ ↩2 ↩3

  12. https://www.oregon.gov/osmb/Pages/Propulsion-Landing-Pages/Go-Paddling.aspx ↩ ↩2 ↩3