Typical listed weights vary by type and length: sit-in kayaks have medians of 45 lb (20.4 kg) under 10 ft (3.05 m), 43 lb (19.5 kg) at 10–12 ft (3.05–3.66 m), 53 lb (24 kg) at 12–14 ft (3.66–4.27 m), and 55 lb (24.9 kg) at 14 ft (4.27 m) and over. Sit-on-tops at 10–12 ft (3.05–3.66 m) have a 57 lb (25.9 kg) median; inflatables at 10–12 ft (3.05–3.66 m), 33 lb (15 kg); and fishing kayaks at 12–14 ft (3.66–4.27 m), 109 lb (49.4 kg). These are medians of listed model weights, not limits for every kayak. For your exact model, check the maker’s weight term and what it includes, then count only the parts that move with it.
Key Takeaways
- Copy your model’s exact weight term, listed weight and stated inclusions.
- List the parts that move together in each separate carry, cart trip or loader lift.
- Add only items not already included in the listed configuration.
- Check that a maker-supported cart or loader matches your boat, load and route.
- Ask the maker to confirm unclear inclusions or component weights before subtracting them.
Start with the maker’s weight term
A kayak’s hull is its body. A maker’s weight label may describe that hull, a more complete setup, or a specific combination of parts. The terms are not interchangeable, so copy the exact label and check the maker’s page or manual for what it includes.
| Maker’s weight term | What the maker says it includes | What to check |
|---|---|---|
| Weight | Jackson Kayak lists the 11 ft 6 in Bite FD at 90.5 pounds; its other labels are “Weight with Seat” at 96.5 pounds and “Weight with Seat & Upper Unit” at 110 pounds.1 | Keep the three maker labels distinct; the first is not identified as a bare hull weight. |
| Fitted Hull Weight | Hobie defines this as the hull plus permanently attached standard features, such as hatches, handles, rudder and hardware.2 | Removable standard equipment is not included in this term. |
| Fully Rigged Weight | Hobie defines this as the fitted hull plus other standard features that can be removed. Its examples include the MirageDrive and seat.2 | Do not add standard removable equipment again if it is already included in the listed figure. |
| Weight with Seat | Jackson lists this term for the Bite FD at 96.5 pounds, compared with 90.5 pounds for “Weight.”1 | Use the maker’s configuration label. Do not assume another maker uses the same convention. |
| Dry Weight | Brooklyn Kayak Company lists 75 pounds for its PK12.3 | Brooklyn does not publish which parts the “Dry Weight” figure includes. Its manual says to remove the seat and pedal drive system, if included, before transport.4 |
Native Watercraft lists “Fitted Hull Weight” and “Fully Rigged Weight” for its Slayer Propel 10 LTE, but its product page does not explain the asterisks beside those terms.5 Confirm the included parts with Native Watercraft before using either number in a calculation.
Compare published weights by type and length
These entries compare maker-listed weights within the same weight term. The median is the middle listed weight among the model entries; the 10th–90th interval spans the 10th to the 90th percentile of those entries, not a boundary for every kayak of that type. Counts are model entries.6 Types can overlap.
| Type | Length band | Weight term | Models | Median | 10th–90th interval |
|---|---|---|---|---|---|
| Sit-in | Under 10 ft (3.05 m) | Weight | 29 | 45 lb (20.4 kg) | 29–51 lb (13.2–23.1 kg) 6 |
| Sit-in | 10–12 ft (3.05–3.66 m) | Weight | 20 | 43 lb (19.5 kg) | 35–52 lb (15.9–23.6 kg) 6 |
| Sit-in | 12–14 ft (3.66–4.27 m) | Weight | 24 | 53 lb (24 kg) | 41–65 lb (18.6–29.5 kg) 6 |
| Sit-in | 14 ft (4.27 m) and over | Weight | 21 | 55 lb (24.9 kg) | 45–68 lb (20.4–30.8 kg) 6 |
| Sit-on-top (open deck, seat on top) | 10–12 ft (3.05–3.66 m) | Weight | 32 | 57 lb (25.9 kg) | 44–77 lb (20–34.9 kg) 6 |
| Sit-on-top | 12–14 ft (3.66–4.27 m) | Weight | 29 | 101 lb (45.8 kg) | 59–138 lb (26.8–62.6 kg) 6 |
| Inflatable | 10–12 ft (3.05–3.66 m) | Weight | 10 | 33 lb (15 kg) | 30–38 lb (13.6–17.2 kg) 6 |
| Fishing | 12–14 ft (3.66–4.27 m) | Weight | 21 | 109 lb (49.4 kg) | 64–140 lb (29–63.5 kg) 6 |
| Pedal | All lengths | Dry Weight | 12 | 75 lb (34 kg) | 59–94 lb (26.8–42.6 kg) 6 |
| Pedal | All lengths | Fitted Hull Weight | 16 | 88 lb (39.9 kg) | 65–120 lb (29.5–54.4 kg) 6 |
| Pedal | All lengths | Fully Rigged Weight | 12 | 125 lb (56.7 kg) | 85–149 lb (38.6–67.6 kg) 6 |
| Fishing | All lengths | Weight with Seat | 11 | 102 lb (46.3 kg) | 78–145 lb (35.4–65.8 kg) 6 |
Use the row that matches your kayak’s type, length band and exact weight term; for example, “Fishing / 12–14 ft / Weight” does not describe a “Weight with Seat” configuration. Tandem, touring, whitewater and folding kayaks have no separate median in this table, so check the maker’s exact model listing. Folding has no eligible published comparison row.
Total the parts that move together
A pedal drive is the foot-powered unit that propels some kayaks. A battery powers equipment such as a fish finder or motor. For each separate move, write down the boat and every part that will be on it. Parts carried in a different trip do not belong in that move’s total.
Use this calculation:
Listed configuration weight (the weight of the parts covered by the maker’s figure) + items added to that configuration − included items removed from it = weight for that move
Do not add a seat or drive twice if the listed term already includes it. Subtract a component only when the maker confirms both that it is included in the starting weight and what it weighs. Count user equipment only when it moves with the boat; a separately carried gear bag is a separate move.
For example, the Bite FD’s “Weight with Seat” is 6 pounds above its “Weight,” and “Weight with Seat & Upper Unit” is 13.5 pounds above “Weight with Seat.” These are differences calculated from the maker’s listed configurations, not standalone component weights. Jackson’s Bite FD page does not say what the “Upper Unit” includes.1 Confirm unclear inclusions with the maker before calculating.
The same kayak can therefore have different moving weights on the walk to the water, on a cart, and during a loader lift. Write down each setup separately. If you are unsure what a term includes, or cannot confirm a component’s weight, ask the maker before calculating.
Choose how to move that configuration
Start with the move that feels impractical in your setup. If you can carry the boat by hand comfortably, count the parts that stay on it and keep separately carried equipment in its own total. If not, compare a cart or loading aid against the conditions its maker lists.
| Option | Compare these factors | Maker-stated conditions |
|---|---|---|
| Carry by hand | The configuration you will carry and the distance to the water. | REI says to look into a cart with wheels if carrying by hand is too difficult.7 For a solo carry, REI describes resting the cockpit rim—the upper edge of the opening—on your shoulder; that method depends on having a cockpit rim.7 |
| Cart | Boat weight with equipment, hull shape, terrain and distance. | Suspenz identifies these as cart-selection factors. It describes center carts as using tie-down straps to carry the load, and its end carts as requiring you to support half the boat’s weight during transport.8 |
| YakAttack TowNStow BarCart | Boat fit, wheel setup, terrain and how the cart will be used. | YakAttack lists the Jackson Bite FD as a BarCart fit, with specified width adjustment and bunk-style orientation, meaning how the hull sits on the cart; it also specifies a wheel-hub tie-down, a fitting that secures the boat to the cart, and does not recommend ratchet straps.9,10 YakAttack lists a rubber-tread wheel designed for hard-packed surfaces, and its page gives the cart’s ratings without naming a wheel: 450 pounds on a flat surface, 300 pounds on a trail and 200 pounds at a 5-inch drop.11 These are cart carrying-load ratings for those conditions, not your lifting ability. YakAttack says the cart is for long-distance transport at walking speed, not towing by another means; its kickstands are not designed to support a loaded kayak.10 |
| Thule Hullavator Pro 898010 loader | Boat weight and whether the vehicle’s roof bars—the bars the loader fits to—meet the loader’s fit conditions. | Thule lists a 75-pound boat-load limit, a 39.7-pound carrier weight and gas-assist struts that lift and lower 40 pounds of the kayak’s weight.12 The 85-pound fitted-hull Outback and 90.5-pound Bite FD configurations both exceed that boat-load limit, even with their listed removable equipment omitted.13,1 The assistance figure is not a guaranteed personal lifting demand. Its installation and roof-load conditions are in Thule’s instructions; see loading a kayak alone before relying on a loader.14 |
For a fishing kayak on a cart, include the drive, seat, battery and accessories that stay aboard. Old Town advises considering leaving heavier components off until launch and carrying them separately. It also says to support the hull without pressure on the scuppers, the drain holes through the hull, and does not recommend scupper carts for its kayaks. Old Town also warns that landing gear can strain and damage the hull.15
For a Hobie Outback from 2019 or later, Hobie’s cart matrix lists its Heavy Duty plug-in cart at a 225-pound capacity for solid surfaces.16 The matrix describes the standard cart as near the upper end of its weight limit and says not to use it with personal gear loaded on the kayak.16 Hobie’s Outback manual also says not to leave the boat on the cart for more than one hour, and to leave it for less time in warmer temperatures or direct sunlight.17 These are Outback-specific conditions; use the guidance for your own boat and cart.
A cart rating describes the cart’s carrying load under stated conditions. A loader’s boat-load limit describes the boat weight it supports, while the carrier itself also adds weight to the vehicle. Check the maker’s fit and load conditions for your equipment before choosing either option. For rooftop transport, use the guides to kayak roof racks, tying down a kayak and roof-load limits (how much weight a roof can carry); this page does not replace those instructions.
If your plan still feels impractical
If the planned move is too difficult, check whether the maker allows you to remove supported components and carry them separately. Recalculate each trip using only what moves together. If you choose a cart or loader, confirm its fit and conditions for your exact boat and setup. If weights or compatibility remain unclear, ask the relevant maker before using that setup.
For help with a loading aid, see lift assist and loading a kayak alone. For cart types and fit, see kayak carts compared. The kayak weight capacity guide covers paddler and cargo capacity, a different figure from the weight you move. Visit the care and transport guides for related topics.
Footnotes
-
https://jacksonkayak.com/products/bite-fd-sit-on-top-pedal-fishing-kayak ↩ ↩2 ↩3 ↩4
-
https://hobiejapan.com/wp-content/uploads/2025/03/HOBIE_2024_catalog.pdf ↩ ↩2
-
https://cdn.shopify.com/s/files/1/0086/9128/6076/files/12.0_Pro_Single_Pedal_PK12_Manual.pdf?v=1751933215 ↩
-
https://www.nativewatercraft.com/products/slayer-propel-10-lte-kayak ↩
-
https://wellpaddled.com/about/owner-review-counts/ ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11 ↩12 ↩13
-
https://www.rei.com/learn/expert-advice/transporting-kayak-canoe.html ↩ ↩2
-
https://www.yakattack.us/blog/townstow-kayak-cart-guide-for-jackson-kayaks/ ↩
-
https://www.yakattack.us/blog/townstow-barcart-quick-start-guide/ ↩ ↩2
-
https://www.yakattack.us/blog/townstow-barcart-kayak-cart/ ↩
-
https://www.thule.com/-/s/approved/std.lang.all/35/78/483578.pdf?rev=6.4 ↩
-
https://oldtownwatercraft.johnsonoutdoors.com/us/blog/guide-fishing-kayak-carts ↩
-
https://media.hobie.com/digital_assets/Cart-matrix-160317_updated_10-2020.xlsx__-__Read-Only.pdf ↩ ↩2
-
https://media.hobie.com/digital_assets/Outback_Manual_2021.pdf ↩