Eddyline and Wilderness Systems say a fresh-water rinse is usually enough, and Eddyline suggests a light soap solution for grungier dirt; Old Town washes with mild soap and water and suggests a vinyl protectant to beautify the exterior. 1, 2, 3
Key Takeaways
- Rinse after paddling, especially after saltwater use; wash with the soap and method approved for your kayak. 1, 4, 5
- Use a surface treatment only when your kayak maker approves it for your boat and surface; approvals do not carry over to another brand. 1, 5, 3, 6
- Keep each maker’s prohibited products and surfaces in mind; approvals do not carry over to another brand. 2, 5
- For scuffs, use the method approved for your hull material, and ask your maker before trying stronger products. 4, 3
Choose by your boat and use
These are Well Paddled’s decision rules based on maker instructions:
- If routine dirt comes off with washing and you want to limit spending, use an approved mild soap you already have; buy a specialty treatment only for a specific purpose. 1, 5
- If you paddle in saltwater, rinse the boat and its fitted moving parts with fresh water after use. Old Town says a boat used frequently in salt water should be rinsed down after every use; Wilderness Systems names the rudder, rudder cables and footbraces. 1, 3
- If your boat stays outdoors, check the table for its approved protectant and any listed interval. 5, 7
- If you own an Eddyline Carbonlite kayak and want to wash and wax in one step, Eddyline recommends Mer-Maid Boat Wash with Carnauba Wax. For an easy-to-apply wax, it names Shurhold Serious Shine. These approvals are for Eddyline Carbonlite. 2
- If routine cleaning leaves scuffs or stubborn marks, use the method approved for your boat: Eddyline names isopropyl or denatured alcohol for stubborn marks, Delta names Novus Polish for minor scuffs, and Wilderness Systems gives material-specific options in the table. 2, 4, 3 Ask your maker before using any stronger chemical than it approves.
| Maker and surface | Routine choice | Optional treatment or purpose | Important restriction | Source |
|---|---|---|---|---|
| Old Town: Polyethylene, Superlinear, Royalex®, and fiberglass canoes or kayaks | Mild soap and water; Murphy’s Oil Soap is also named | Vinyl protectant such as Armor All®, 303 Products, or Pledge for exterior appearance; Old Town says these are safe on its listed materials | No paste car wax on the hull; Murphy’s Oil Soap, Armor All®, 303 Products, Pledge, and polishes are not recommended inside because they may make the floor slippery | 1 |
| Eddyline: Carbonlite, with an ABS substrate and acrylic exterior | Fresh-water rinse; light soap solution for heavier dirt; keep hatch covers and rims free of sand or other material that could prevent a good seal | Mer-Maid Boat Wash with Carnauba Wax for combined cleaning and waxing; Shurhold Serious Shine for wax | Keep strong solvents and ammonia-based cleaners off; for Carbonlite 2000, also avoid toluene, MEK, and lacquer/paint thinner; eraser sponges may dull the glossy finish | 2 |
| Delta: Solarkote | Warm soapy water with a soft cloth or sponge; rinse after saltwater use and clean and dry the cockpit and hatches before winter storage | Novus Polish or similar for minor scuffs; Armor All™ Original spray or wipes to clean and lubricate the Press-Lock seals around the hatch covers only; this is not a hull treatment | Delta advises against 303 Protectant on its boats; do not use strong solvents such as acetone or lacquer thinner | 4, 6 |
| Sea Eagle: its inflatable boats | Hose off between uses if needed; use Simple Green at season’s end | 3M Marine Cleaner & Restorer for mud, oil, bird droppings, and other debris; Sea Eagle lists its 303 Protectant for kayaks and canoes | Dry thoroughly before storage; Sea Eagle says its 303 Protectant is applied every 30–45 days; Gold Eagle says not to use 303 Aerospace Protectant on floorings | 8, 7, 9 |
| AIRE: its inflatable boats | Dish soap in warm water with a sponge or soft-bristle brush; water hotter than 140°F can damage PVC and urethane | 303 Aerospace Protectant once or twice a year for UV protection | Do not use silicone-containing products, WD-40, Armor All, or harsh chemicals; keep lubricants off the valve and zipper; do not apply 303 to floorings, including the boat’s standing floor | 5 |
| NRS: its inflatable boats | Clean and inspect after each use; NRS Inflatable Boat Cleaner for dirt, oxidation, smudges, oil, stains, and frame marks | NRS says to apply 303 Aerospace Protectant twice yearly, such as before and after storage. Its cleaner is around $16; cleaner plus a 16-ounce protectant is around $36 total (sum of NRS’s prices on its own pages, November 2026; tax and shipping excluded). | Wet the surface first, ventilate the work area, and do not let the cleaner stand on painted or varnished surfaces; do not apply 303 to floorings, including the boat’s standing floor | 10, 11, 12 |
| Wilderness Systems: polyethylene hulls and PRO fiberglass/Kevlar composites | Usually a fresh-water rinse | Polyethylene: marine polish designed for polyethylene. PRO composites: an abrasive rubbing compound followed by a polishing compound for scratches; the manual names no specific product. 303 Protectant is a named UV option; 303’s directions say not to use it on floorings, clear plastics, fabrics or gauge panels.9 | Do not sand or use abrasive rubbing compound on polyethylene | 3 |
Rinse, wash, and treat
For routine washing, follow the table’s soap, water, and cloth instructions for your boat.
For its Inflatable Boat Cleaner, NRS says to wet the surface with water, spray on the cleaner, let it sit for up to one minute, scrub the inflatable with a brush, sponge, or cloth, then rinse with water.10
Swift Canoe & Kayak’s owner’s manual for its kayaks suggests rinsing the boat inside and out after use with a mild soap and water solution, calling Dawn dish soap “a great choice,” or with a boat wash product, and using a soft-bristle scrub brush on mud, dirt, water stains and pollen.13
Dry an inflatable thoroughly before storing it. Sea Eagle says to make sure its boats are completely dry to prevent mold, which will not damage them but leaves a stain that cannot be removed.8 If you use a protectant your maker approves, follow that maker’s interval. For an approved 303 treatment, Gold Eagle says to apply it to a clean, dry surface out of direct sunlight, wipe it thoroughly, remove excess with a damp towel, and buff dry. 14, 9
Where next
For more guidance by hull material, see Kayak care by material, or visit Care and transport.
Footnotes
-
https://oldtownwatercraft.johnsonoutdoors.com/us/frequently-asked-questions ↩ ↩2 ↩3 ↩4 ↩5 ↩6
-
https://media.pelicaninternational.com/m/410782ee41ef26bc/original/WS_14_Owners_Manual.pdf ↩ ↩2 ↩3 ↩4 ↩5 ↩6
-
https://www.deltakayaks.com/wp-content/uploads/2018/10/2018-delta-kayaks-owners-manual.pdf ↩ ↩2 ↩3 ↩4
-
https://cdn.shopify.com/s/files/1/0937/9905/5492/files/AIREOwnersManual2023.pdf?v=1750710358 ↩ ↩2 ↩3 ↩4 ↩5 ↩6
-
https://www.seaeagle.com/accessories/care-preservation/303-protectant ↩ ↩2
-
https://www.goldeagle.com/product/303-aerospace-protectant/ ↩ ↩2 ↩3
-
https://www.nrs.com/learn/inflatable-boat-use-care-instructions ↩
-
https://swiftcanoe.com/wp-content/uploads/2020/09/KayakOwnersManual.pdf ↩