Kayak fishing

Kayak Fishing Accessories: What to Add First and How They Fit

Use these rules to choose your next addition:

  • If your equipment baseline is incomplete, finish it first. The U.S. Coast Guard requires a wearable life jacket for each person aboard and identifies federal requirements as minimums, with additional state rules potentially applying.3
  • If you need somewhere to put your rod between casts, start with one compatible holder. YakAttack’s Omega uses a rotating collar to capture the reel and offers different positions for access and retention.1
  • If organizing tackle and spare rods is the priority, compare storage before adding another mount. YakAttack’s BlackPak Pro combines a latched lid, tackle-box storage and rod holders with integrated tethers.2
  • If you want sonar information, choose the complete electronics arrangement before buying the display. YakAttack’s CellBlok combination includes a battery box, transducer arm and battery, but excludes the fish finder mount and track.4
  • If you want to hold position or slow your drift, choose by that job. Hobie describes its stakeout pole for shallow sand or mud and its drift chute for slowing wind-driven drift; SEA-LECT warns against anchoring in strong currents, waves or high winds.5

Establish what must already be aboard

A personal flotation device, or PFD, is a life jacket. The U.S. Coast Guard requires yours to be approved, serviceable, appropriately sized and suitable for the activity; a carried wearable jacket must also be readily accessible.3 The Coast Guard recommends wearing it, and its guide exempts canoes and kayaks from the additional throwable-device requirement that applies to other boats of certain lengths.3

For fishing comfort, the American Canoe Association’s Kayak Fishing guidance recommends a fishing-specific life jacket designed to allow casting and paddling, with pockets for accessible tackle.6 Choose fit and movement before pocket count.

The Coast Guard’s federal rule requires children under 13 to wear an approved life jacket while underway, subject to its stated exceptions and differing state requirements on waters under state jurisdiction.3 Pennsylvania’s Fish and Boat Commission also requires everyone aboard kayaks to wear a life jacket from November 1 through April 30.7

Sound and lighting belong in this baseline. Texas Parks and Wildlife lists an efficient sound-signaling device, such as a whistle or air horn, and a 360-degree white light after dark or in reduced visibility among required paddling equipment.8 Pennsylvania’s Fish and Boat Commission specifies a white light, handheld or installed, ready to display in time to avoid collision, and a sound device capable of a prolonged blast.7

For coastal outings, the Coast Guard’s guide requires approved visual distress signals on the waters it identifies, including U.S. coastal waters and the Great Lakes; manually propelled boats are exempt from daytime signals but must carry nighttime signals when operating between sunset and sunrise.3

Check your state and launch requirements before choosing accessories. For example, Pennsylvania’s Fish and Boat Commission requires registration or a launch permit when using its launch areas or Pennsylvania State Park launch areas.7

Check the attachment before choosing the accessory

A gear track is a slotted rail that accepts accessory mounting hardware. Treat the accessory, its base and your kayak’s attachment as separate checks.

YakAttack lists the Omega as compatible with MightyMount, GearTrac and most kayak tracks from Scotty, RAM Mounts and YakGear, while specifying an adapter for FeelFree Kayaks, 3 Water Kayaks and Jonny Boats.1 Match the exact base to your existing track before ordering.

Compatibility also has exceptions within an apparently suitable system. YakAttack’s GT90 Top Loading GearTrac accepts half-inch-wide (12.7-millimeter-wide) track hardware, but the maker explicitly excludes the RAM Mounts Quick Release Track Base.1 Its optional FullBack backing plate is intended to ease installation and increase security.1 A backing plate supports the mounting area from behind.

Choose the attachment for its intended use. RAILBLAZA describes the MiniPort TracMount as light duty, while its StarPort HD has four fixing points and a larger footprint that the maker says reduce deck stress and flex when supporting trolling rod holders.9 Trolling means fishing with a lure or bait trailing behind the moving boat.

Before drilling, consult the kayak manual and the mount’s complete installation instructions. Old Town’s Owner’s Manual requires manufacturer-approved materials for added outfitting and says additions must not impair entry or exit.10 Ask the kayak maker to confirm the mounting location, fasteners, backing and sealant for your model.

For an inflatable, identify the fabric and approved attachment first. RAILBLAZA says its RIBPort and QuikPort can bond to Hypalon and PVC inflatable tubes, and recommends their supplied adhesive pads where the surface has little curvature.9 Use its RIBPort fitting instructions using 3M VHB self adhesive pad for the complete preparation and fitting procedure; the maker specifies about 72 hours for full bond strength.9

Keep mount loading separate from boat capacity. RAILBLAZA cautions that the maximum load in a particular installation may be much lower than its published static load.9 NuCanoe’s Owner’s Guide says not to exceed the boat’s weight and capacity limit and to distribute weight evenly from front to rear.10 Make a loaded-gear list, including contents and batteries, and ask the relevant maker about any unclear allowance.

Choose rod holders and storage around your reach

Start with one holder if your existing tackle arrangement works. YakAttack says the Omega accommodates spinning, casting, larger conventional reels and fly rods; its collar retains the rod by capturing the reel.1 Bring your rod-and-reel combination to the fit decision, especially if you want to leave the reel pointing downward.

Decide whether the holder is mainly for parking a rod, carrying a spare or trolling. Check the reach and angle you want before selecting its mounting position.

For a crate, measure the tankwell—the recessed open storage area—before choosing a nominal size. YakAttack lists the 13-by-13-inch BlackPak Pro’s external dimensions as 12.94 by 12.94 by 13.3 inches (32.9 by 32.9 by 33.8 centimeters), and instructs you to add 2.75 inches (7 centimeters) on every side fitted with TetherTubes.2

That extra allowance deserves attention before buying. YakAttack lists this crate at 8.2 pounds (3.7 kilograms) with its three included TetherTubes, before adding your tackle.2 Compare the loaded arrangement with your kayak’s capacity check.

Separate three securing jobs: closing the tackle compartment, retaining rods and attaching the crate. YakAttack provides lid latches, integrated rod tethers and corner brackets that accept several hold-down arrangements, including its included OmniHooks, generic hooks, carabiners or bungee.2 Confirm which attachment points your kayak provides.

For drainage, choose the storage component deliberately. YakAttack describes its compatible mesh storage bag as allowing water drainage, while describing the crate lid as water shedding.2 Put items needing water protection in a suitable separate container.

Before fixing the layout, sit in your usual fishing position. Check paddle movement, access to tackle, rod removal and lid opening. The Coast Guard Auxiliary and American Canoe Association’s A Paddler’s Guide to Safety warns that fishing lines and deck gear can complicate reentry and create entanglement and hook hazards.6 Keep that warning in mind when choosing tether lengths and routing.

Give the landing tool its own storage position

Choose a landing net alongside the rod and storage layout. YakAttack’s Leverage Landing Net has a forearm grip for one-handed control, a folding handle and a foam-covered extension intended to fit tube-style or flush-mounted rod holders.11

For the larger model, YakAttack specifies a 20-by-21-inch hoop (51 by 53 centimeters).11 Check both its folded storage position and your ability to retrieve and open it while seated. Reserve that space before filling every holder with rods.

The Coast Guard Auxiliary and ACA’s paddling guide warns that bringing a fish aboard can challenge balance and draw attention away from the surroundings.6 Treat a reachable landing tool as part of the fishing layout; do not make standing your assumed landing position.

Buy a fish finder as a complete system

Add electronics when you can name the information you want from them. Sonar uses sound to provide information about what is beneath or beside the boat; the transducer is the component that sends and receives that sound.

Write down five matching parts before purchasing: display, display mount, transducer, transducer attachment and power supply. Then check connectors and water protection.

YakAttack’s Fully Loaded SwitchBlade, CellBlok, and 10ah Battery Combo Kit illustrates the distinction between a bundle and a complete installation: it includes the battery arrangement and transducer arm, but requires a compatible YakAttack fish finder mount and excludes GearTrac.4 YakAttack specifies at least 10.5 inches (26.7 centimeters) of track for the CellBlok.4

Choose the transducer location with its mount. YakAttack’s SwitchBlade provides an adjustable over-the-side arrangement, while Garmin describes a kayak in-hull mount that sends the signal through the boat’s bottom.4,12 Garmin lists no drilling and no external drag among the in-hull option’s advantages, alongside some signal loss through the hull.12 Confirm that your particular transducer, sonar functions and kayak material match the proposed installation.

Match electrical specifications, too. Garmin’s STRIKER Vivid Owner’s Manual lists an input range of 12 to 20 volts direct current and a 3-ampere fast-acting fuse.12 YakAttack describes its bundled battery as a 12-volt, 10-amp-hour lithium-ion pack.4 Use the display’s installation instructions to confirm the complete power arrangement.

Water protection is component-specific. Garmin rates the STRIKER Vivid device IPX7, explaining that it withstands incidental exposure in up to 3.3 feet (1 meter) of water for up to 30 minutes.12 YakAttack calls its battery pack water resistant.4 Check the battery, connections and display individually before settling on their locations.

Choose boat control for the job and bottom

An anchor is intended to hold position; a drift chute is an underwater fabric drag device intended to slow movement. A stakeout pole is pushed into the bottom in shallow water.

Hobie describes its stakeout pole for sand or mud, and its drift chute for slowing drift in wind when anchoring is unwanted or impractical.5 Choose the pole for a suitable shallow-water holding job, or the chute when your aim is a slower drift.

For an anchor, compare the intended bottom with the maker’s description. Extreme Max describes its BoatTector folding grapnel anchor as suited to coral, rocky or heavily weeded bottoms and short-term anchoring; the kit includes an anchor, rope, snap hook, marker buoy and storage bag.13 Do not choose by anchor weight alone.

An anchor trolley moves the attachment point along the kayak. SEA-LECT’s system accommodates an anchor, drift chute or stakeout pole, and its installation instructions address mounting hardware, access behind fasteners and a cleat reachable from the seated position.5 Read the full SEA-LECT Designs Anchor Trolley Kit instructions before deciding whether to install it yourself.

SEA-LECT warns that anchoring in strong currents, waves or high winds could swamp a kayak.5 The Coast Guard Auxiliary and ACA’s guide also directs kayak anglers to anchor from the bow rather than the cockpit.6

Finish your shortlist with one next purchase. Choose a holder for rod parking, a crate for tackle organization, a reachable net for landing, electronics for a defined sonar need, or boat control for a suitable holding or drifting job. Confirm fit, loaded weight and attachment before adding the next item.

Footnotes

  1. https://www.yakattack.us/omega-rod-holder-with-track-mounted-locknload-mounting-system/ ↩ ↩2 ↩3 ↩4 ↩5 ↩6

  2. https://www.yakattack.us/blackpak-pro-kayak-fishing-crate-13-x-13-jetty-blue/ ↩ ↩2 ↩3 ↩4 ↩5 ↩6

  3. https://www.uscgboating.org/assets/1/AssetManager/Boaters-Guide-to-Federal-Requirements-for-Receational-Boats-20231108.pdf ↩ ↩2 ↩3 ↩4 ↩5

  4. https://www.yakattack.us/fully-loaded-switchblade-cellblok-and-10ah-battery-combo-kit/ ↩ ↩2 ↩3 ↩4 ↩5 ↩6

  5. https://sea-dog.com/sc/RawData/Sea-Dog/Publications/83 ↩ ↩2 ↩3 ↩4

  6. https://americancanoe.org/wp-content/uploads/documents/sei-educational_resources/kayak_fishing_final.pdf ↩ ↩2 ↩3 ↩4

  7. https://www.pa.gov/agencies/fishandboat/fishing/basics/kayak-fishing ↩ ↩2 ↩3

  8. https://tpwd.texas.gov/boating/paddling-trails/faqs/ ↩

  9. https://intl.railblaza.com/faq/ ↩ ↩2 ↩3 ↩4

  10. https://johnsonoutdoors.widen.net/content/gtfkqjadpu/pdf/otc_owners_manual_web.pdf ↩ ↩2

  11. https://www.yakattack.us/leverage-landing-net-20-x-21-hoop-with-foam-extension/ ↩ ↩2

  12. https://www8.garmin.com/manuals/webhelp/GUID-C3C9935A-44AD-4A64-8690-B6176625C6BC/EN-US/Striker_Vivid_OM_EN-US.pdf ↩ ↩2 ↩3 ↩4

  13. https://www.extrememax.com/product-p/3006.6548.htm ↩