Kayak fishing

Crates, Coolers and Tackle Storage on a Kayak

Choose a starting setup

  • If your usual tackle trays fit a simple crate, start there. Choose a lidded purpose-built crate if you want included rod holders with integrated leashes, latches, and attachment points.1,2
  • If you keep fish and a tapered bag fits the available space, choose an insulated catch bag. Leave room and weight for both ice and fish; the bag’s listed volume is not the space available for fish after adding ice.3,4,5
  • If a hard cooler’s outer length and width on deck, internal catch space, room for its lid to open, and empty weight fit, choose it when a rigid body and one-handed latch suit your use. YETI’s archived Roadie 15 product page’s Measurements & Specs section lists exterior dimensions of 16.9 by 11.2 by 14 inches and interior dimensions of 13.6 by 7.5 by 10.6 inches.6 Check those dimensions against your kayak; a product’s dimensions do not guarantee it will fit every boat.7,8
  • If you have a Hobie Mirage Pro Angler 12, start with its built-in pivoting rack for the tackle boxes you regularly reach for. A pivoting rack is a holder that swings to give access to stored tackle; add a crate only if you need more space and it also fits.9
  • If a container will not fit, choose a smaller one or use existing tackle-box or pouch storage. If the full load exceeds your maker’s rating, reduce what you carry before adding storage.4,1,9
OptionSuited toCheck before choosingPublished protection or access
Simple crateTackle boxes that fit in a basic crate (no rod holders)Tank-well footprint and height against the crate’s listed outer dimensionsYakGear’s currently sold-out starter kit lists a standard 13-inch by 13-inch crate and a 7-inch-tall by 12-inch-wide accessory pouch.1
Lidded crateTackle plus maker-provided rod and gear attachment pointsInternal room for boxes; added width from any side-mounted rod tubesThe BlackPak Pro has a hinged lid and latches; its maker describes the lid as water-shedding.2
Insulated catch bagFish and ice in a flexible, tapered containerBag dimensions, loops for securing straps, and room for ice as well as fishThe Reliable bag lists closed-cell foam insulation, a zipper, and a drain plug; these features are not a waterproof rating.3
Hard coolerCatch storage in a rigid containerOutside footprint, inside dimensions, lid clearance, and empty weightThe YETI Roadie 15 lists insulation, a one-handed latch, and tie-down slots. Its maker says liquid can leak if it is on its side or upside down.7
Built-in pivoting rackQuick access to selected tackle boxesWhether your kayak has the rack and whether the boxes you use fitThe Mirage Pro Angler 12 page lists a pivoting rack for two included medium Flambeau tackle boxes and accessible storage underneath.9

Check fit, access, and attachments

Compare each container’s outside dimensions with the usable floor of the tank well. Allow for a recess that narrows toward one end and for any rod tubes that stick out. Then compare its inside dimensions with the tackle boxes, catch, and ice you plan to carry.

Also check hatch openings—the access openings in the deck into the hull—and obstructions, whether a lid or rack can move freely, whether you can reach the storage while seated, and whether it blocks getting in or out.

The makers do not publish hatch volumes or tank-well dimensions for the Old Town Sportsman PDL 120 or Hobie Mirage Pro Angler 12. Measure the usable tank-well floor and compare it with your container’s exterior footprint; outside hull dimensions do not tell you a hatch’s usable space.10,9

Hobie says never to open hatches in unstable water, to keep them secure, and never to remove the foam pieces inside the hull.11 YETI says not to stand on or use the Roadie 15 as a casting platform.7

Vibe Shearwater 125 tank well

For one named example, Vibe lists the Shearwater 125 tank well as 24 inches long by 19 inches wide.8 That is the well’s stated size, not a fit guarantee: the usable floor is the flat, unobstructed area where the container will sit, so measure its length and width at the narrowest point where it will rest.8

YakAttack BlackPak Pro 13 x 13

The YakAttack BlackPak Pro 13 x 13 has published external dimensions of 12.94 by 12.94 by 13.3 inches and internal dimensions of 11.9 by 11.9 by 11.75 inches.2 It weighs 6.9 pounds without TetherTubes or 8.2 pounds with the three supplied TetherTubes.2

The maker advises adding 2.75 inches for each side where you intend to attach a TetherTube.2 Its listed attachment choices include OmniHooks, generic hooks, carabiners, or bungee; it fits eight 3600 Plano boxes, but that box count is not a weight rating.2

Catch space and ice

For a catch option, the Reliable Fishing Products 16 x 24 Insulated Kayak Bag is listed as 24 inches long, 7 inches tall, and tapered from 16 inches to 7 inches wide, with approximately 26 quarts of storage.3 It has half-inch-thick foam insulation, and the maker says the bag holds ice.

It also has four D-rings—two on each side where you can clip straps to secure the bag.

YETI says the Roadie 15 holds 16 pounds of ice or 22 cans; those are separate contents figures.6 YETI recommends two parts ice to one part contents by volume for its cooler, so allow for ice taking up room when planning its catch space.3,7,5

Tracks and track hardware

A track is a mounting rail for compatible accessories. The Old Town Sportsman PDL 120 page lists two 18-inch tracks for mounting fish finders, rod holders, and other accessories, plus a bungee system for securing crates, coolers, and other gear.

YakAttack’s GT90 Top Loading GearTrac 16-inch track is listed as 0.90 inches wide and 16 inches long, and it is compatible with half-inch-wide track hardware.12 That compatibility does not guarantee that a crate or cooler fits the kayak or is supported by the track.

If you plan to carry a loaded container on a track, ask the maker about that accessory and load before choosing. The track maker also says the top loading GT90 is not intended for use with the RAM Mounts Quick Release Track Base.12

Installation and attachment points

For installation details, use the BlackPak Pro Assembly Instructions or, for the Hobie’s built-in storage, the Mirage Pro Angler Manual. The BlackPak manual states that a rod-holder connection under heavy loads is not strong enough with fewer than three screws; follow the manual for that attachment rather than inferring a limit from the product page.13,11

Before launching, secure the loaded container through its designated attachment points to kayak anchors approved for that purpose.

Check the full load

Use the capacity figure your kayak maker provides and check what it counts. Old Town lists the Sportsman PDL 120 with a 500-pound total capacity, which includes the assembled boat, people, gear, pets, and the motor or pedal console when applicable.

Its 384-pound usable capacity is the allowance for people, gear, and pets after subtracting the assembled boat’s 116 pounds. The assembled weight includes the supplied hull, hardware, seat, accessories, and applicable motor or pedal console.4 For example, a BlackPak Pro with its three supplied TetherTubes weighs 8.2 pounds, and an empty YETI Roadie 15 weighs 9.60 pounds.

BlackPak Pro and YETI Roadie 15

Together they weigh 17.8 pounds.

Subtracting the kayak’s 116-pound assembled weight and those two containers from the 500-pound total leaves 366.2 pounds for your body and clothing, rods, tackle, ice, catch, and all other added gear. This is arithmetic from the maker’s figures, not a recommended load.4,2,7

Check the complete load this way: 116 + 8.2 + 9.60 + body and clothing + rods + tackle + ice + catch + other added gear ≤ 500 pounds. Or compare all added weight—including you and the storage containers—with the Sportsman PDL 120’s 384-pound usable capacity. Do not count the supplied seat or pedal console twice; count aftermarket equipment separately.

Weigh a bag if you use one, since its listed page does not give an empty weight. Check the actual combined fit too: being within a capacity rating does not mean two containers fit in the tank well.4,3 For more detail on capacity terms, see kayak weight capacity explained.

Footnotes

  1. YakGear, Kayak Angler Kit in Crate – Starter ↩ ↩2 ↩3 ↩4

  2. YakAttack, BlackPak Pro Kayak Fishing Crate – 13” x 13” ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8

  3. Reliable Fishing Products, 16” x 24” Insulated Kayak Bag ↩ ↩2 ↩3 ↩4 ↩5 ↩6

  4. Old Town, Sportsman PDL 120 ↩ ↩2 ↩3 ↩4 ↩5 ↩6

  5. YETI, Roadie Hard Cooler FAQ ↩ ↩2

  6. https://web.archive.org/web/20260826153949/https://www.yeti.com/coolers/hard-coolers/roadie/roadie-15.html ↩ ↩2

  7. YETI, Roadie 15 Hard Cooler ↩ ↩2 ↩3 ↩4 ↩5

  8. Vibe Kayaks, tank-well dimensions and Shearwater 125 Manual ↩ ↩2 ↩3

  9. Hobie, Mirage Pro Angler 12 ↩ ↩2 ↩3 ↩4

  10. Old Town, Owner’s Manual ↩

  11. Hobie, Mirage Pro Angler Manual ↩ ↩2

  12. YakAttack, GT90 Top Loading GearTrac 16” ↩ ↩2

  13. YakAttack, BlackPak Pro Assembly Instructions ↩