If the guidance sends your kind of damage to a dealer, professional or maker, follow that direction.
A hull is the boat’s outer body.
For a problem you believe is covered under warranty, Wilderness Systems’ owner’s manual directs you to the nearest authorized Wilderness Systems dealer and says its website lists all dealers.1
Key Takeaways
- Match the repair guidance to your kayak’s maker, model and material.
- Use owner-repair advice only for the damage it describes.
- Contact the maker or a dealer when its guidance directs you to them.
- Check the warranty before changing or repairing the boat.
Rotomolded polyethylene
Rotomolded polyethylene is plastic shaped in a rotating mold. Current Designs describes its polyethylene models as rotationally molded from linear polyethylene.2
Scratches and dents
For superficial scratches on Wilderness Systems polyethylene kayaks, the maker says a marine polish intended for polyethylene can reduce their appearance. It advises against sanding or abrasive rubbing compound.3
Current Designs describes correcting dents with warmth, including on a warm sunny day, and warns against overheating. Check its manual for the guidance that applies to your model.2 Holes and cracks are a different case.
Holes and cracks
Current Designs recommends taking damage in its polyethylene boats to a dealer or experienced plastic welder. Its manual names color-matched polyethylene welding rods for this repair; plastic welding joins plastic with heat.2
Wilderness Systems advises owners seeking repair advice to contact a local dealer or customer service.3
Thermoform: Eddyline Carbonlite
Thermoform describes how a plastic sheet is shaped to make a kayak. Eddyline says Carbonlite has an ABS base material beneath an outer layer made mainly of pigmented and clear acrylic. That construction description is specific to Carbonlite.4
Wear and abrasion
Eddyline’s Carbonlite owner’s manual recommends checking that all deck-hardware nuts are secure and inspecting shock-cord (elastic deck cord) ends at their fittings and the cord itself for wear and abrasion. It also says the grab loops at each end should support the boat’s weight and advises checking their ropes for wear.5
Rough edges and cosmetic repairs
Eddyline says rough edges on its Carbonlite kayaks may be sanded with fine sandpaper.6
Eddyline describes scratches, cuts and gouges that do not penetrate the ABS base layer as cosmetic repairs. Its named supplies include methyl methacrylate adhesive (Devcon Plastic Welder), the Carbonlite Repair Kit, sandpaper, polish and pigment. Here, “Plastic Welder” is an adhesive product; it is not the heat welding Current Designs describes for polyethylene.4,6 Eddyline also publishes guidance for more involved Carbonlite repairs, including cracks or punctures that go through the acrylic into the ABS base and need fiberglass reinforcement (glass-fiber layers added to strengthen a repair).
Cracks and punctures
Its FAQ covers cracks or punctures that go through the acrylic into the ABS base. It calls for fiberglass cloth tape, a strip of woven glass fibers used to strengthen the repair, and links to the crack procedure in its Kayak Care and Repair article.6
Eddyline does not say every penetrating crack must go to a dealer, and does not publish a separate owner-or-dealer rule for cracks confined to the acrylic. Read the maker’s instructions for your kayak before deciding whether the repair fits your damage.4
Storage compartment leaks
For small leaks into a kayak’s storage compartment, other than a hull crack, Eddyline names 3M™ Marine Adhesive Sealant Fast Cure 5200 or Sikaflex®-291 and advises against silicone.4 Keep this advice to the compartment-leak situation Eddyline describes.4
Composite
Composite kayaks use resin to bond layers of reinforcing material, such as fiberglass, Kevlar or carbon. Those bonded layers are called a laminate. Gelcoat is the outer resin finish on a composite boat.3,2
Gelcoat repairs
BoatUS says some gelcoat cracking is cosmetic, but extensive cracks or cracks left unattended for a long time can let moisture into the deck or hull.7
Current Designs describes using gelcoat for scratches or chips in the finish of its composite hulls, and says gelcoat is available through its dealers or directly. For scratches and surface cracks on its composite kayaks, Current Designs offers a kit containing 4 ounces (113 grams) of gelcoat in its current kayak colors; the maker cautions that color matches are approximate.8
For a large repair area, it suggests contacting a dealer; for structural damage, it advises professional repair or advice about the specific damage.2 Seaward’s gelcoat-chip repair instructions call for roughening the damaged area with sandpaper so the repair has something to grip.9
Structural damage
A chip in the finish differs from structural damage to the laminate, the bonded layers beneath the finish. Don’t treat gelcoat advice as a repair method for a damaged laminate. Current Designs does not give a numerical cutoff for a “large” gelcoat repair, so contact the maker or dealer if you are unsure which category fits.2
Folding: Oru Kayak
Folding kayaks use a hull that folds for storage or transport. Oru’s repair kit is an example for its own boats, not a guide for every folding kayak.
The maker says the kit can repair small holes on fold lines. Its listed supplies include waterproof tape patches, a primer stick (a preparatory coating used before glue), glue, an adhesive plastic patch (a plastic patch with adhesive) and a helicopter tape patch. The product page does not explain when to use the primer stick or helicopter-tape patch.10
Use the kit only for damage covered by Oru’s guidance. Contact Oru’s service team about a suspected defect or damage you cannot match to the kit’s purpose. Its warranty policy asks owners to include photographs, the hull identification number (the identifier requested for a claim; the policy does not say where to find it), model and order number when contacting the team.11
Inflatable: Sea Eagle 350fx Fishing Explorer
Inflatable kayaks can use different materials and construction, so the repair advice here applies to the Sea Eagle 350fx Fishing Explorer manual only. For the 350fx, Sea Eagle says that when the valve stem is up, the valve is closed and holds air.12 For that model, Sea Eagle describes punctures and small cuts as patch repairs using polyvinyl chloride (PVC) patches and PVC glue, which Sea Eagle says come in the repair kit included with its boats.12
PVC patches and glue
The manual says to use an adhesive intended for PVC boats. It rejects plumber’s cement, epoxy, Flex Seal, waterproofing sprays and Gorilla Glue for this repair.12
For extensive repairs to this model, Sea Eagle says to contact the company for assistance or its professional repair service. Its manual asks you to e-mail a photo of the damaged area with the hull identification number when you seek help with extensive repairs, and requires prior authorization (a Return Authorization Number) before a boat is sent to its repair facility.12
Inflatable boat valves
Separately from Sea Eagle’s manual, NRS’s guide for inflatable boat valves, which it says also applies to Halkey-Roberts, Summit and military valves as well as the Leafield C7 it shows, says to find a leak by spraying soapy water or 303 Aerospace Protectant around and in the throat of the valve.13
If the leak is around the valve perimeter, NRS says to tighten the valve’s outer portion with a valve wrench; if that does not stop it, remove the valve, loosening it with the chamber inflated, which NRS says is easiest: take off the outer portion, clean the mating surfaces of the boat material and valve body, screw the valve back together hand-tight, then inflate the chamber to complete tightening.13
If the valve leaks through its throat, NRS says grit or debris is probably keeping the valve seat from closing fully: spray some 303 in with the chamber inflated and push the valve plunger to try to dislodge it, or with the valve open, reach in with a cotton swab moistened with 303 to clean the sealing surfaces.13
Check the warranty before you repair
A maker’s repair advice does not, by itself, settle whether a repair is covered by the warranty. The terms vary by maker and damage. Sea Eagle states that all its products come with a three-year warranty against manufacturing defects, beginning on delivery.14 Contact the maker or dealer before repairing damage that might involve a defect or a claim.
Jackson Kayak and Wilderness Systems
In its warranty for the US and Canada, Jackson Kayak excludes damage to the tracks or hull from aftermarket outrigger or wheel systems such as the Boonedox Landing Gear.15
For Wilderness Systems, Pelican Intl Inc./Confluence Outdoor excludes products that have been structurally or dimensionally altered or repaired by unauthorized persons. Its policy does not define which owner repairs count as authorized, so ask before proceeding.16
Eddyline and Current Designs
Eddyline’s FAQ excludes normal wear, improper use, abuse and improper storage. It does not expressly promise that every owner repair described in its guidance preserves warranty coverage.4 Eddyline’s Carbonlite 2000 manual says its three-year warranty against material and workmanship defects, measured from purchase, requires original ownership and return of the warranty registration card.17
Current Designs covers manufacturing or material defects, while saying negligence, improper use or accident damage for which it is not at fault is repaired for a charge. Its warranty page does not state whether each owner repair is authorized. Keep your original purchase receipt for a warranty claim.18
Oru
Oru’s US policy excludes ordinary punctures, cuts and abrasions, and products that have been structurally altered or modified. It does not say every repair-kit use voids coverage. For a problem, its service team requests photographs, the hull identification number, model and order number.11
Sea Eagle
Sea Eagle excludes damage from improper repair attempts, as well as ordinary abrasions, tears and punctures. Its warranty requires photographs and troubleshooting information for a claim, and the maker’s approval (return authorization). As of April 2026, Sea Eagle’s warranty page also excludes damage resulting from use of a pump it did not supply.19
The same warranty page also excludes crazing, blistering and aging of fabrics, metals or wood.19 Those exclusions do not say that every owner patch voids the entire warranty.20
If you suspect a defect or may make a warranty claim, check the maker’s claim instructions before changing the boat. The exclusions above differ, and a maker’s published owner repair does not guarantee that the repair will be covered.
Where to go next
- For more on care choices by hull material, see Kayak Care by Material.
- For the wider care section, visit Care and Transport.
- For related care topics, see inflatable kayak repair and kayak hardware and hatches.
- For warranty terms by maker, see kayak warranties compared.
Footnotes
-
https://media.pelicaninternational.com/m/410782ee41ef26bc/original/WS_14_Owners_Manual.pdf ↩
-
Current Designs, Owner’s Manual, repair pages 18–19 ↩ ↩2 ↩3 ↩4 ↩5 ↩6
-
Wilderness Systems/Confluence Outdoor, Wilderness Systems FAQ ↩ ↩2 ↩3
-
https://cdn.shopify.com/s/files/1/0284/7725/9864/files/Carbonlite_Owners_Manual.pdf?v=1693257223 ↩
-
https://www.boatus.com/expert-advice/expert-advice-archive/2026/june/value-proposition ↩
-
Sea Eagle, 350fx Fishing Explorer Instruction & Owner’s Manual ↩ ↩2 ↩3 ↩4
-
https://www.nrs.com/learn/troubleshoot-boat-valve-leaks ↩ ↩2 ↩3
-
https://www.seaeagle.com/img/PDF/HullInstructions/EZL10.pdf ↩
-
Wayback Machine copy captured May 15, 2026 of https://jacksonkayak.com/warranty/ ↩
-
https://cdn.shopify.com/s/files/1/0284/7725/9864/files/Carbonlite_Owners_Manual.pdf?v=1693257223 ↩
-
Wayback Machine copy captured April 2, 2026 of https://www.seaeagle.com/Warranty ↩ ↩2