Use these rules to narrow your choice:
- If you have GearTrac, consider the YakAttack Omega with its track-mounted LockNLoad base; YakAttack names that pairing.1
- If you have Hobie H-Rail, start with a fitting specifically made for it; RAILBLAZA identifies its RailMount 32-41, supplied with H-Rail inserts, as compatible.3
- If you have a RAILBLAZA mounting port, choose a holder from that system; its Rod Holders instructions state that all its rod holders fit any RAILBLAZA mounting port.4
- If you have no accessory fittings, compare a suitable clamp with a permanent base: Scotty offers coaming clamps, while RAILBLAZA offers an adhesive RIBPort base for inflatables.2,5 The coaming is the rim around a kayak’s seating opening.
- If you intend to troll, choose a holder approved for that use. RAILBLAZA’s Rod Holders instructions permit trolling with Rod Holder II and advise against it with Rod Holder R or Rod Tube.4
Match every connection
A track is a slotted mounting strip. A rail is a bar that a mount grips. A base connects the holder to the boat; an adapter connects otherwise different fittings.
Write your proposed combination in one line:
Rod holder → base or socket → adapter, if needed → exact kayak fitting.
Then record a product number for each part. Use the following combinations as starting points.
| Boat fitting | Holder and connection | Maker-published fit | Purchase check |
|---|---|---|---|
| YakAttack GearTrac | Omega with track-mounted LockNLoad | GearTrac and MightyMount; also “most” kayak tracks from Scotty, RAM Mounts and YakGear | FeelFree, 3 Water Kayaks and Jonny Boats require the AAP-1012 adapter.1 |
| Scotty 440 Low Profile Track | Scotty post-mount holder → 438 Gear Head Track Adapter | Scotty names the 438/440 pairing; the adapter fits all Scotty post mount rod holders and accessories2 | Confirm whether your holder package includes the adapter and track. |
| Track accepting the RAILBLAZA kit | RAILBLAZA holder → StarPort HD → StarPort HD Track Mount Kit | The Rod Holders instructions specify the separate kit for track installation | Include the StarPort HD and conversion kit in your parts list.4 |
| Hobie H-Rail | RAILBLAZA holder → RailMount 32-41 | RAILBLAZA expressly identifies H-Rail compatibility | The RailMount package includes H-Rail rubber inserts and stainless steel hardware.3 |
| H-Rail with a RAM arrangement | RAM holder → matching socket arm → H-Rail ball base | Hobie’s August 2019 accessory catalog lists H-Rail RAM bases with 1-inch or 1.5-inch balls | Match the ball size throughout the proposed assembly; confirm current part numbers before ordering.6 |
Keep the qualifier “most” when reading a compatibility claim. Send the accessory maker your track’s brand, model and measurements if the exact track is unclear.
YakAttack’s GT90 Top Loading GearTrac provides a useful exception: it accepts ½-inch-wide track hardware, but YakAttack specifically excludes the RAM Mounts Quick Release Track Base.1 Do not extend one named pairing to every product carrying either brand.
Also separate bolt-hole compatibility from accessory compatibility. RAILBLAZA states that StarPort HD shares the hole pattern used by rectangular bases from Scotty, RAM, Attwood and Fish-on; its Rod Holders instructions separately identify the RAILBLAZA mounting-port connection.3,4 Ask for confirmation before placing a different brand’s holder directly into a socket.
For broader installation planning, see Fishing Kayak Rigging: Tracks, Mounts and Warranty Terms.
Identify your factory fittings by model and year
Record your kayak’s exact model, model year and serial number. Photograph the fittings from above and from the side, including any labels, inserts and track openings. Ask the kayak maker to identify the fitting if the boat’s documentation is unclear.
These named examples show why that identification matters:
| Kayak | Maker-described factory fittings | What to confirm before buying |
|---|---|---|
| Hobie Mirage Outback | Dual H-Track Deluxes with H-Rail; Hobie describes H-Rail with integrated RAM Hand-Track | Identify whether the proposed mount grips the rail or uses the track slot.7 |
| Hobie Mirage Pro Angler 14 | Six horizontal rod lockers and an H-Rail accessory system | Decide whether you need storage or an additional adjustable fishing holder.8 |
| Old Town Sportsman 106, 120 and BigWater 132 | The Sportsman Paddle Manual identifies plastic accessory tracks and rod holders | Confirm the exact track hardware and usable length for your boat.9 |
| Old Town Sportsman 120 PRO | The Sportsman Paddle Manual identifies aluminum accessory tracks, a rod holder and an accessory plate | Identify which mounting location your proposed accessory will use.9 |
Measure the usable slot length on your boat and request the shipped track count and dimensions for the model year you are buying. Keep factory dimensions separate from optional accessory dimensions.
For example, Hobie’s August 2019 catalog describes a 17.5-inch (44.5-centimeter) H-Rail upgrade with integrated track for H-Track DLX.6 Treat that as an identified upgrade specification; confirm your boat’s installed fitting separately.
When comparing boats, use Choosing a Fishing Kayak: The Specs That Matter alongside your accessory list.
Choose the holder for the rod’s job
For a rod you frequently pick up, start by comparing adjustable holders and their retention controls. YakAttack’s Omega has a rotating collar that captures the reel and accommodates spinning, casting, conventional and fly setups.1 RAILBLAZA Rod Holder II has a rotating collar and a rear gimbal lock, which limits rotation with compatible rod handles.4
For trolling—fishing with a line trailing behind the moving boat—follow the exact product’s instructions. RAILBLAZA’s Rod Holders instructions identify Rod Holder R as light duty and reserve trolling use for Rod Holder II.4 Those instructions also require a MiniPort used for trolling to be on the right, or starboard, side so that strike loading tightens it; they warn that loading on the left side can loosen it.4
A rocket launcher is a tube-style holder. Scotty publishes a 1.7-inch (43.2-millimeter) interior diameter for its Rocket Launcher and stainless steel Rocket Launcher, and 1.85 inches (47 millimeters) for Rod Master II.2 Compare your handle’s widest section with the chosen holder, then check reel clearance and access to the retention control.
A flush mount sits recessed into the deck. Distinguish a socket receiving a removable holder from a tube receiving the rod: Scotty’s 244 Flush Deck Mount is a base, and Scotty packages its 351 Rod Master II with that base.2
Before ordering, ask to check your actual rod and reel in the proposed holder. Check the handle length, butt diameter, reel position and removal movement.
Check package contents just as closely. Scotty lists Rocket Launcher 479 without a mount and 476 with a 241 Side Deck Mount; RAILBLAZA’s standalone Rod Holder R lists one holder as its included part.2,10 Put every required base and adapter on the order.
For spare-rod arrangements, continue to Crates, Coolers and Tackle Storage on a Kayak.
Reserve space for the holder and electronics
RAILBLAZA’s kayak rigging guide recommends placing holders within easy reach and outside your paddle stroke.11 Use that as the starting point for a seated layout check.
Ask to try the proposed arrangement with your seat and foot supports adjusted. Check access to the rod, locking controls and display. Include pedal travel, drive removal, hatch opening and the holder’s full adjustment range in your fit request. Ask the maker or installer to confirm fishing-line and hook clearance for the intended rod angle.
For entry and exit, Old Town’s Sportsman Paddle Manual specifically requires added outfitting to leave access unobstructed and calls for manufacturer-approved materials.9
Reserve track space by the accessory’s published requirement. YakAttack specifies at least 10.5 inches (26.7 centimeters) of track for its CellBlok battery box.1 Its CellBlok/SwitchBlade combination still requires a compatible fish-finder mount and battery, and excludes the GearTrac and fish-finder mount.1 Allocate that space before choosing a neighboring rod-holder position.
For display and transducer choices, see Fish Finders on a Kayak: Sonar, Transducer Mounts and Safe Power.
Confirm the installation before drilling
Request the instructions for the exact base and the kayak maker’s approval for the proposed location.
Scotty’s 244 Flush Deck Mount specification sheet gives overall dimensions of 4 by 2 by 2 inches (10.2 by 5.1 by 5.1 centimeters) and hole centers of 3.2 by 1.3 inches (8.1 by 3.3 centimeters); it labels the drawing “not to scale.”12 Use the proper template rather than scaling that illustration.
The same Scotty sheet specifies separately purchased ¼-20 stainless steel pan-head machine screws or No. 12 wood screws, with length dependent on the application, and directs users to apply anti-seize to machine screws.12 Ask which fastening arrangement suits your installation.
For thin-walled craft, Scotty describes its 441 Backing Plate as structural support for side-deck or flush-deck mounts.2 Ask whether the proposed location needs one and whether there is access underneath.
RAILBLAZA’s Rod Holders installation instructions require waterproof sealant in drilled holes and beneath the mount, and require fasteners matching any existing threaded inserts.4 Follow the complete instructions for the selected base.
For an adhesive installation, use RAILBLAZA RIBPort fitting instructions using 3M VHB self adhesive pad.5 Those instructions require an inflatable vessel to be fully inflated during installation and state that full bond strength takes 72 hours.5 Confirm the boat material and approved preparation before buying.
Ask for the permitted loading of the complete installation before trolling or adding an extension. RAILBLAZA cautions that a mounting arrangement’s allowable load may be much lower than its quoted maximum static load.3
Check warranty terms against the exact proposed modification. Confluence’s warranty policy excludes structurally or dimensionally altered or modified products and repairs by unauthorized persons.13 Request written confirmation for your boat; see Kayak warranties compared for broader terms.
Resolve slipping, jamming or leaks before reuse
If a mount slips, pause its use and ask the maker to check the complete assembly, orientation and fastening arrangement.
For a tight RAILBLAZA connection, its FAQ explains that nylon rod-holder bases can absorb water and expand; it recommends dry storage and allowing a wet, tight accessory to dry.3 Its Rod Holders instructions warn that petroleum-based lubricants cause StarPort-slide failure; the FAQ also warns against damaging aerosol propellants.4,3
For water entering around an installation, ask the kayak maker to identify the repair. Wilderness Systems’ FAQ identifies loose or broken deck fittings among the checks for leaks and lists replacement fittings and neoprene washers for deck leaks.14
Finish your purchase with an itemized holder, base, adapter and hardware list, plus confirmed boat fit, rod fit, mounting space and installation instructions. If any connection remains unclear, pause the order and send that list to the maker.
For the rest of your setup, return to Kayak Fishing: Boats, Drives, Rigging and Rules or continue to Safety Kit for a Kayak Angler.
Footnotes
-
https://www.yakattack.us/omega-rod-holder-with-track-mounted-locknload-mounting-system/ ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7
-
https://scotty.com/wp-content/uploads/2025/02/25_MarineCatalogue.pdf ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7
-
https://www.railblaza.com/assets/Products/Downloads/Rod-Holder-II-Rod-Holder-Instructions-3535.pdf ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9
-
https://static.hobiecat.com/web_uploads/2019/04/04/Web_Retail_Hobie_Kayak_August_2019.pdf ↩ ↩2
-
https://johnsonoutdoors.widen.net/content/gtfkqjadpu/pdf/otc_owners_manual_web.pdf ↩ ↩2 ↩3
-
https://www.railblaza.com/how-to-outfit-your-kayak-the-ultimate-rigging-guide/ ↩
-
https://scotty.com/wp-content/uploads/2025/05/INS_244.pdf ↩ ↩2
-
https://www.confluenceoutdoor.com/pages/wilderness-systems-faq ↩