Use these rules to make the first choice:
- If you expect surf, leave the scuppers open. Viking specifically says scupper plugs should not be used when going through surf.1
- If you want a drier boat during winter paddling, consider removable plugs after checking your kayak’s instructions. Plug maker Kayak Scupper Plugs recommends winter use to keep the boat and paddler drier.3
- If a heavier fishing load brings water into the seating area, check the model’s load guidance before choosing plugs. Viking identifies a heavy load as one reason water may enter through scuppers on a lake.1 Pelican’s manual prohibits exceeding the kayak’s maximum weight.4
- If you need drainage while keeping a plug installed, compare a compatible self-draining design. Kayak Scupper Plugs offers both solid pull-loop plugs and plugs that let excess water drain through them.3
- If you are replacing a missing plug, identify the hole before ordering. Pelican’s manual labels self-bailing scupper holes and the hull drain plug as separate components.4
Identify the hole before choosing a plug
A scupper is a drainage opening. The hull is the body of the boat; the deck is its upper surface.
On a sit-on-top kayak, scuppers allow water to flow into and out of the exposed seating and storage areas.3 Viking describes its sit-on-top design as self-bailing: most water entering the cockpit drains through the scuppers.1 “Self-bailing” means draining water without you having to scoop it out.
Look around the whole deck. Kayak Scupper Plugs identifies common scupper locations in the footwells, seatwells and tankwells.3 Its model-specific kits cover the kayak’s plug locations, while individual plugs are available for selected holes or replacements.3
A hull drain plug serves a different opening. Kayak Scupper Plugs’ replacement drain-plug page describes small drain holes used to empty water that has leaked inside the hull.5 For Pelican kayaks, the owner’s manual requires the drain plug to be firmly installed before launching.4
Use your model’s parts diagram to settle any uncertainty. For more background on the seating layouts, see Sit-Inside or Sit-on-Top: Which Kayak Suits You.
Match the size, location and quantity
Start your shopping list with the exact kayak model and model year, then list the hole locations you want to plug. Prefer a model-specific fit listing when one is available.
Confluence’s FAQ specifies Pelican small scupper plugs for its models except the Catch PWR, Catch 110 HDII and Catch 130 HDII, which need medium plugs.6 The same FAQ directs owners of current Perception, Wilderness Systems and Dagger kayaks to Standard Scupper Plugs.6
Old Town’s Scupper Fit Guide, revision January 2025, separates fit by model and location, with columns for stoppers and valves.2 Its stopper labels include small yellow, medium blue and large red; the Ocean Kayak section also includes extra-small green.2 Treat those colors as identifiers within that guide.
| Maker or product | Stated fit | Quantity or location detail | Selection check |
|---|---|---|---|
| Pelican scupper plugs | Small for most models; medium for Catch PWR, Catch 110 HDII and Catch 130 HDII | Fit listed by kayak model | Match the named Pelican size to the model.6 |
| Old Town / Ocean Kayak stoppers and valves | Model- and location-specific | Guide gives counts for each location | Check the exact model row, including any date or exception note.2 |
| YakAttack Universal Scupper Plugs, SM / MED | Circular holes, 1.13–1.40 inches (28.7–35.6 millimeters) in diameter | Two plugs per pack | Compare the hole diameter with this range.7 |
| YakAttack Scupper Plugs, MED/LRG | Circular holes, 1.35–1.70 inches (34.3–43.2 millimeters) in diameter | Two plugs per pack | Compare the hole diameter with this range.8 |
| YakGear Universal Scupper Plug Kit | Product description gives a circumference range | Four plugs per kit | Confirm the required measurement with YakGear before ordering.9 |
For a concrete example, Old Town’s guide lists the Sportsman BigWater 132 with four small yellow stoppers and four medium blue stoppers: the bow-end cockpit and tankwell locations take yellow, while the cockpit near the seat and under-seat locations take blue.2 Buying eight identical plugs would miss that distinction.
Model dates can matter too. The guide lists the Ocean Kayak Malibu Two before February 2023 with four yellow stoppers, and the version after February 2023 with six blue stoppers.2 Use the dated entry rather than the model name alone.
Count the locations you intend to close before converting that list into packs. Keep the maker’s location notes beside your order, especially when buying a mixture of sizes.
What “universal” and “tapered” mean for your choice
A tapered plug narrows toward one end. YakAttack’s plugs use a conical shape, hollow construction and soft rubber to accommodate their stated circular-hole diameter ranges.7,8 “Universal” still comes with fit limits on those products.7
Kayak Scupper Plugs favors a closer size match and less taper, arguing that greater contact with the hole wall improves sealing.3 Treat that as the plug maker’s design explanation, rather than a reason to assume every broadly fitting plug will leak.
Be careful with the measurement itself. YakGear’s description calls its range a circumference, while YakAttack explicitly gives diameter ranges.9,7 Diameter is the straight-line distance across a circle; circumference is the distance around it.
Choose solid plugs or a draining design
For occasional use, start by considering a compatible solid plug with an accessible pull feature. Kayak Scupper Plugs’ Standard Pull Loop design uses a rope for removal without special tools and can be removed on the water to release excess water.3 YakAttack’s listed plugs have a rigid center for pushing them into place and a pull tab for removal.7,8
For drainage with the plug left installed, consider a model-compatible valve design. Kayak Scupper Plugs describes its G3 Self-Draining With Pull Loop as having a valve that defaults to an open drain position.3 The maker also notes that the larger valve cannot be offered in some smaller plug sizes.3
Old Town’s guide provides short- and long-valve alternatives by location.2 Use its valve column separately from the stopper column: for the Sportsman 106, for example, the guide lists yellow stoppers in both cockpit and tankwell locations, but short cockpit valves and long tankwell valves.2
For fishing electronics, check the cable route before choosing a solid replacement. Kayak Scupper Plugs sells split transducer plugs designed to fit around a cable running through a scupper.3 A transducer is the underwater sensing part of a fish finder.
Understand drainage, swamping and capacity
The central trade-off is water entry versus water escape. YakGear describes scupper plugs as seals that keep extra water out of the sit-on-top cockpit.9 Kayak Scupper Plugs describes removing its solid pull-loop plugs when excess water needs to drain.3
If water collects after you install solid plugs, follow the plug maker’s drainage instructions. For its Standard Pull Loop plugs, Kayak Scupper Plugs specifically provides for removal on the water to drain excess water.3 Its self-draining designs offer a different arrangement, with water passing through the installed plug.3
Leaving scuppers open is part of the drainage design, rather than an indication that pieces are missing: Viking says most cockpit water drains through them.1 On swamping, Kayak Scupper Plugs explains that this drainage helps prevent excessive water from breaking waves or splashes from filling the boat.3 Do not turn that into a guarantee about whether a particular kayak can sink.
Load needs a separate decision. Viking allows for plugging scuppers to restrict water entry when carrying a heavy load on a lake, so a blanket “heavy load means open holes” rule would misstate its guidance.1 Pelican’s manual nevertheless requires you to stay within the kayak’s maximum weight.4
Keep the kayak maker’s maximum weight as your loading limit. Ask the maker which capacity applies to your exact model and plug configuration before adding load. Use Fishing Kayak Capacity: Total Against Usable for the broader loading decision.
Fit, remove and care for compatible plugs
Use the instructions for the plugs you bought. For Kayak Scupper Plugs products, Scupper Plug Installation and Care gives these fitting checks:10
- Push the plug into place with the palm of your hand, without tools.10
- Expect a tight fit; the plug should not push through the hole during normal installation.10
- A slightly raised plug can be normal, although it should not stand excessively tall.10
- Do not force it into place with a mallet or hammer.10
- On standard pull-loop plugs, keep the knot tight against the rubber plug’s underside to help the seal.10
Pause installation if the fit fails those checks and contact the plug maker. Kayak Scupper Plugs notes that manufacturing variations and mold changes can affect fit, and offers size changes for plugs that are too large or small.10
For its plugs that fit initially but later pop out, the maker recommends a gentle wash with dish soap.10 It discourages lubrication because it can make the plugs pop out more easily.10 For self-draining plugs affected by grass, mud or twigs, it recommends swishing them in a bucket of water and advises against disassembly.10
Before buying replacements for lost plugs, check the model, location and original size again. Confluence directs owners to the model’s parts list to verify compatible parts and to customer support if the list does not resolve the choice.6 Keep removed plugs together with a note identifying their locations.
Treat inflatable drain valves and storage separately
Sea Eagle’s September 2012 FastTrack Kayaks 385FT & 465FT Instruction & Owner’s Manual directs owners to close and tighten the drain valves for calm lake and stream paddling; it warns that leaving them open lets water enter and makes maneuvering harder.11
That manual identifies four drain valves through the oval stern cutout and gives different instructions for drainage in rapids.11 Follow the manual for your exact inflatable and intended use.
Storage instructions also differ from launch instructions. Pelican’s manual calls for removing the hull drain plug during extended storage to regulate air pressure, while requiring it firmly in place before launching.4 Keep that hull drain-plug task distinct from choosing which deck scuppers to close.
Where next
Use Kayak Hardware and Hatches for broader hardware care, How to Store a Kayak for storage planning, and Kayak Fishing for related rigging guides.
Footnotes
-
https://vikingkayaks.co.nz/faq/what-are-the-holes-for/ ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7
-
https://johnsonoutdoors.widen.net/content/nxw4bojni2/pdf/oldtown-scupper-fit-guide-web.pdf ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8
-
https://www.kayakscupperplugs.com/ ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11 ↩12 ↩13 ↩14
-
https://media.pelicaninternational.com/m/a3bc20a14bde943/original/OM_THERMO_KAYAK.pdf ↩ ↩2 ↩3 ↩4 ↩5
-
https://www.kayakscupperplugs.com/kayak-scupper-plug-shop/p/press-in-replacement-kayak-drain-plug-sit-on-top ↩
-
https://www.confluenceoutdoor.com/pages/frequently-asked-questions ↩ ↩2 ↩3 ↩4
-
https://www.yakattack.us/universal-scupper-plugs-sm-med-2-pack/ ↩ ↩2 ↩3 ↩4 ↩5
-
https://www.yakattack.us/scupper-plugs-med-lrg-2-pack/ ↩ ↩2 ↩3
-
https://www.yakgear.com/products/yakgear-universal-scupper-plug-kit ↩ ↩2 ↩3
-
https://www.kayakscupperplugs.com/scupper-plug-installation ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10
-
https://www.seaeagle.com/img/PDF/HullInstructions/FTC.pdf ↩ ↩2